Modern technologies help a person to quit smoking with minimal discomfort. For this, a variety of electronic cigarettes are produced. They differ in a number of characteristics. One of the popular devices that help overcome nicotine addiction is the Eleaf Istick Pico.
The presented device is characterized by small dimensions and sufficiently high power. At the same time, the electronic cigarette received a beautiful, stylish design. Features of this model must be considered before purchase.
General characteristics
Eleaf Istick Pico Kit 75w has become a worthy innovation in the product line from a well-known manufacturer. The presented device consists of a box mod and a clearomizer. This electronic cigarette is compact in size. So, the body height is only 7 cm. At the same time, the clearomizer, which is included in the package, has a length of only 4.5 cm.
At the same time, the device is quite powerful (75 W). The operation of the electronic cigarette is provided by a conventional removable 18650 battery. The new Starter Kit is quite small. Therefore, it lacks such interesting improvements as a screen. However, this is not at allreduces the comfort in using the presented device.
The prefix in the name of the Pico device should be translated as "outstanding" and "innovative". The device received the ability to manually adjust the TCR resistance on thermal control. The menu is no different from analogue products that are on the market.
Package
It should be said that you can buy a set of Eleaf Istick Pico 75w at a price of about 3 thousand rubles. In this case, the buyer has the right to expect to receive certain components.
The kit includes a box mod without a battery. It will need to be purchased separately. Also, the user who opens the box will see a removable Melo 3 clearomizer. In some kits, the manufacturer provides for a mini version of the presented model. The volume of the clearomizer in this case is not 4, but only 2 ml.
Comes with a USB cable for recharging and firmware updates. Spare colored o-rings are provided for Melo 3. Also included are 2 instructions for the box mod and the clearomizer. Melo 3 comes with 2 replacement coils.
Appearance
It should be noted that the manufacturer is releasing a new modification of the presented electronic cigarettes. It's called Eleaf Istick Pico Mega. This model is characterized by an output power of 1-80 W and has the ability to run on a 26650 battery. Otherwise, the presented devices are similar. Their appearance is almost the same.
The Istick electronic cigarette is made from zinc alloy. Available in 5 colorsfor box mod. Housing can be:
- black;
- grey;
- pink;
- white;
- metallic colors.
Ergonomic lines of the device allow you to comfortably feel the mod in your hand. To be able to hide the battery in the case, the developers used a convex cover. It provides a few extra inches to hide the battery.
The small size caused the placement of the "-" and "+" buttons on the bottom of the case. They are comfortable to press with your little finger. Users note the high build quality. Details do not wobble. The total length of the product when assembled is only 11.5 cm. Therefore, it can be easily hidden in your hand. It will fit in your pocket, bag, without causing any inconvenience.
Clearomizer
The clearomizer of the Eleaf Istick Pico Kit has an updated design and feature set. It has stylish shapes. The Melo 3 clearomizer is fully collapsible. It can be made of glass or metal. In case of accidental mechanical damage to the part, you can change the glass. The clearomizer can be completed with multi-colored o-rings. This will complement the appearance of the device.
Refueling at Melo 3 occurs through the top. The lid is unscrewed, after which the liquid is easily poured inside. In this case, you do not need to disconnect it from the box mod. To increase or decrease traction, you need to rotate the additional ring. Under it are invisible adjustment holes.
In the third versionThe clearomizer is equipped with a dual-coil evaporator. They are made from kanthal. The spiral has a resistance of 0.5 ohms. For temperature control mode, it is proposed to use an evaporator with titanium and nickel coils.
Functionality
Eleaf Istick Pico TC can operate from 1W to 75W. In this case, the adjustment step is 0.1 W. For the Mega model, this figure reaches 80 W.
The temperature control function assumes the operation of the device in the range from 100 to 315ºС. In this case, the setting can be done in steps of 10ºС. Windings for the block mod can be made of titanium, nickel, steel. If an unsupported metal is used, you can manually set the resistance according to the table. It is included in the instructions. In this case, it is permissible to use a different winding. In TK mode, you can change the power manually.
The diameter of the clearomizer must not exceed 23 cm. Otherwise, the cover on the battery compartment will interfere with the installation of this part.
The display of the presented model is of high quality. Users claim that information can be easily read both in the dark and in direct sunlight. The display shows the temperature, battery charge. Also here is information about the number of volts, ohms, watts. The display can be turned off if desired. Image can be rotated 180º.
Food
Users have noted that the 18650 battery compartment is slightly shorter than the battery itself. It is covered with a convex lid. Rechargeable batteries recommendedfor Eleaf Istick Pico 25 A. The contact in the compartment on the positive side has a spring. This ensures a snug fit for the battery.
The autonomy of the device is estimated as high. The minimum battery voltage threshold at which the device can operate is about 3.3 V. In this case, the battery is easy to change.
The connector is made of steel. The spring loaded pin is made of brass. The twisted connector is sunk into the body. At the same time, clearomizers can leave marks on the surface of the block mod. You need to twist them carefully. If you change the size of the removable part, scratches on the metal surface may be noticeable.
Firmware and protection
Eleaf Istick Pico firmware is upgradable. This fact allows you to add all the new features provided by the manufacturer. This greatly improves the comfort of using the device.
To update the firmware, you will need to use a USB port and a cable. On the manufacturer's website, you will need to download the appropriate program. The device comes with software version 1.0. It is assumed that the new version will increase the power of the device up to 90 watts.
The device has several protective functions. The manufacturer has provided a system to avoid damage due to a short circuit, overheating of the evaporator and / or board. There is also protection against overcharging and overdischarging, high or low resistance, voltage. The device hasgas outlet holes. This allows you to significantly extend its work, to avoid unforeseen troubles.
Management
The Eleaf Istick Pico electronic cigarette is controlled by the user with 3 buttons. The main one is "Fire". Also at the bottom are additional buttons "-" and "+".
To turn the device on or off, press the Fire button five times. You can also switch modes using this main button. In this case, you will need to press it 3 times. The desired function is selected using additional buttons at the bottom of the device.
To be able to control the temperature of the board, you need to press the main button 10 times in a row. If the device is in the off state, you can hold "Fire" and "-" at the same time. In this case, the device will show the battery voltage level. Pressing the main button twenty times will provide information about the firmware version of the device.
To lock additional buttons and prevent accidental settings of the device, you need to hold them at the same time. By pressing "+" and "Fire" at the same time, the user will be able to block the resistance. If this manipulation is performed at the moment when the power of the device is turned off, it will go to the TCR mode settings menu. All functions and settings are presented by the manufacturer in the instructions.
Negative reviews
The Eleaf Istick Pico electronic cigarette receives mostly positive feedback from users. Negative statements also occur. However, theyonly apply to certain functions. In general, almost all buyers noted the presented device as worthy of attention.
Among the negative reviews, one should highlight statements about plastic punching on the display. This is an insignificant drawback, but it somewhat worsens the appearance and overall impression of the device. It is also noted that it is impossible to use atomizers with a diameter exceeding 23 mm.
Due to the design features, abrasions quickly appear at the top and bottom of the device. Also, many users find it inconvenient to switch modes using the buttons located at the bottom of the device. Users note that additional buttons have a backlash, stagger a little.
Positive Feedback
Despite some shortcomings, the presented device receives a lot of positive feedback from buyers and specialists. When the model appeared on the free market, many experts doubted that such a small device could fully operate in 75 W mode. However, the device fully complies with the specifications declared by the manufacturer.
The cost of an electronic cigarette is quite acceptable for most users. It is interesting for its small size and light weight. The battery is quick and easy to change. This is a fairly functional, powerful model. It can be used even while charging.
The firmware to be updated was also noted by customers as an advantage of the model. This is a stylish, high-quality mod that many users have been waiting for. He is popular.
Having considered the features of the electronic cigarette Eleaf Istick Pico, it can be noted that this is a decent, functional model. It is of high quality and is in demand among buyers.
